Install Collecting Flask In Cassette - Heidolph LABOROTA 20 eco Mode D'emploi

iEi

4. Install collecting flask in cassette

Loosen and remove 4 ea. knurled knobs (1).
•
Lift and remove top panel (2).
•
Install collecting flask (6) in bottom panel (3).
Aerating fitting (4) needs to point forward.
•
Reinstall top panel (2) and secure with the 4
knurled knobs (1)
•
Install cassette assembly. (with collecting flask) on
bracket (8)
•
Hold handle (7) of bracket (3), loosen thumbscrew
(5), and lower bracket completely; install cassette
completely (direction as marked).
•
Lift handle (7) until ground joint of collecting flask
reaches mating end of condenser, secure with
thumbscrew (5)
•
use S40 flask clamp to secure both parts in place
8
48
8