Laboratory Set-Up - Heidolph LABOROTA 20 eco Mode D'emploi

iEi
SAFETY INFORMATION:
THIS APPLIANCE IS NOT EXPLOSION-PROTECTED. USE EXTREME CARE WHEN
USING IN THE VICINITY OF FLAMABLE OR EXPLOSIVE SUBSTANCES.
When connecting this product with your local power supply, make sure you got the
right thing ! Check VOLTAGE DATA on DATA PLATE (located in the rear).
This product has to be branched with your local 3-phase network by a skilled electrician.
Wire code:
3 x Phase
1 x Phase

LABORATORY SET-UP

GREEN/YELLOW
BLUE
BROWN
BLACK
GREY
GREEN
WHITE
BLACK
44
= protective ground (PE)
= neutral (N)
= phase (L)
= phase (L)
= phase (L)
= protective ground (PE)
= neutral (N)
= phase (L)