Key Function; I/O Actuator Function; Intercom Function; Self-Ignition Function - Comelit 1454 Manuel D'utilisation

If you cannot see the main screen, click

Key function

The software sets the "Key function"
external unit used by the interlocutor (see page 33 for confi guration).
The Key function woks both during calls and outside calls. Up to 2 procedures can be
programmed for each mode (in-call or standby).
} Click on the button (
to carry out the programmed procedure(s).

I/O Actuator function

The I/O Actuator function (disabled by default) can be used to activate the relay for a specifi c
actuator installed in the system (see page 34 for confi guration).
} Click on the button (
function to carry out the programmed procedure.

Intercom function

The intercom function (disabled by default) can be used to call an internal unit (monitor,
switchboard, door-entry phone or PC-Intercom) (see page 35 for confi guration).
} Click on the button (
make the call.

Self-ignition function

The Self-ignition function (disabled by default) can be used to display images from the camera
associated with an external unit or from a remote camera (see page 36 for confi guration).
} Click on the button (
function to display the images from the camera.
If several cameras are associated with the Self-ignition function, click the button several times
to view the various video sources in a cyclical manner.

Privacy / Doctor mode

The software sets "Privacy mode" by default (see page 37 for confi guration).
} Click on
The button will light up in red to indicate that the function has been activated.

Call Divert Function

The "Call Divert" function enables you to divert a call to an internal unit or switchboard. (see
page 38 for confi guration).
} Click
to activate/deactivate the programmed function.
The red icon indicates that the function is active, while the green icon indicates that the function
is not active.
for default "in-call" activation of the relay corresponding to the
/ /
/ /
/ /
/ /
to activate the programmed function.
to return to the home screen.
/ / ) programmed for the Key function
/ / ) programmed for the I/O Actuator
/ ) programmed for the Intercom function to
/ / ) programmed for the Self-ignition
25