Program Buttons - Comelit 1454 Manuel D'utilisation

Program buttons

} Click
to access the "SETTINGS" menu.
} Click
to access Key programming.
The fi rst time you access the address confi guration, key programming and call confi guration areas, you will be
asked to enter a password: the default password is 0000 (to set a new password, see page 31 for instructions).
} Enter the password and click
} Click
to display the confi gurations without the possibility of modifying them.
} Click
/
} Select one of the options "Intercom", "Self-ignition", "Key", "I/O Actuator", "Function disabled".
For these buttons, the software applies the default setting: "Function disabled".
R
Intercom:
Program VIP address
/ /
to access set/modify confi gurations.
/ / /
Tick this option to program intercom calls to an internal unit in the system.
VIP address: If this option is selected, you will then need to enter the ViP address
of the user you want to associate with the intercom call.
Bracket: If this option is selected, you will then have to choose whether you want
to call the Master monitor or a Slave monitor (for which the identifi cation number
will be required) for your apartment.
/ /
to access Key programming.
35