Comelit 1454 Manuel D'utilisation page 37

R
Self-ignition:
system (up to a maximum of 9 cameras).
Adding a camera
1. In the address window, select an available slot.
2. Click on the button Modify.
3. In the "Address" fi eld, enter the ViP address of the external unit or camera
4. Select the camera from which you wish to receive an image.
5. Click
Editing a camera
1. In the address window, select the camera you wish to edit (the fi eld will be
2. Click on the button Modify.
3. In the "Address" fi eld, edit the ViP address of the external unit or camera
4. Select the camera from which you wish to receive an image.
5. Click
Deleting a camera
1. In the address window, select the camera you wish to delete (the fi eld will be
2. Click on the button Disable.
3. Click
If more than one camera is set for the self-ignition function (MAX. 9), every time the button
is pressed, the software will cycle through the available options.
For Kit 8501, 8501I and 8504, the "auto-activation" function (
call the porter with ViP address 00000100.
36
Tick this option to program the self-ignition of any camera connected to the
module with which you wish to associate the "Self-ignition" function.
to save the settings, or
highlighted in green).
module with which you wish to associate the "Self-ignition" function.
to save the changes, or
highlighted in green).
to confi rm camera deactivation; click
to cancel the settings.
to cancel the changes.
to cancel camera deactivation.
) is set by default to