Using The Directories; Call User / Porter; Camera Activation; Actuator Activation - Comelit 1454 Manuel D'utilisation

Using the directories

Call User / Porter

The "call User / Porter" function can be used to make calls to another internal unit or another
ViP address (to add, delete or edit an entry in the Users / Porters directory, see page 27-28).
1. Click /
2. Click the entry you wish to call (the fi eld will be highlighted in green, see fi gure on page 28).
3. Click (button [A] in the fi gure on page 27) to start the call.
4. Click if you want to carry out the procedure(s) associated with the Key button.
5. Click when you want to end the call.

Camera activation

The "camera activation" function can be used to display images from the camera associated
with an external unit or from a remote camera (to add, delete or edit an entry in the Cameras /
External Units directory, see page 27-28).
1. Click /
2. Click the entry for which you wish to activate the camera (the fi eld will be highlighted in green,
see fi gure on page 28).
3. Click (button [A] in the fi gure on page 27) to activate the camera.
4. Click if you want to carry out the procedure(s) associated with the Key button.
5. Click when you want to switch off the camera.

Actuator activation

The "actuator activation" function is used to activate the relay for a specifi c actuator installed in
the system (to add, delete or edit an entry in the Actuators directory, see page 28).
1. Click to access the Actuators directory.
2. Click the actuator entry you wish to activate (the fi eld will be highlighted in green, see fi gure on
page 28).
3. Click (button [A] in the fi gure on page 27) to activate the actuator.
26
to access the Users / Porters directory.
to access the External Units / Cameras directory.