Capacitive-Touch Key Description; Indicator Led Description - Comelit HFX-9000M Manuel Technique

2.2.1 Capacitive-touch key description

SPEAKER AND AUDIO ACTIVATION KEY / PAGING CALL KEY / HANDS-FREE MODE ACTIVATION KEY
Answer call
Can be used to activate a conversation with the external unit or to end a conversation.
Paging call
Internal paging function: can be used to make a paging call to the internal units with the same user code.
General paging to another user code: can be used to make a paging call to the internal units with another user code.
Hands-Free mode
On receipt of a call the audio will be activated automatically.
LOCK-RELEASE KEY
can be used to activate the lock-release relay
PRIVACY KEY
Privacy mode
Can be used to enable or to disable the ringtone for calls from the external unit and paging.
[programmable]
ACTUATOR KEY [programmable]
Generic actuator function: can be used to activate the relay for a generic actuator installed within the system.
Coded actuator function: can be used to activate the relay for a specific actuator installed within the system.
DOCTOR MODE [programmable]
can be used to enable automatic activation of the lock-release in response to a call from the external unit.
[programmable]
SELF-IGNITION [programmable]
Can be used to receive images from the main external unit cameras (press the key again to cycle through several external unit
Audio volume key
Ringtone volume key
Value 'Up/Down' key
Contrast key
Brightness key

2.2.2 Indicator LED description

FLASHING LED: incoming call
STEADY LED (WITH CALL): In communication
STEADY LED (IDLE): Hands-Free mode enabled
FLASHING LED: Incoming call
FLASHING LED (SLOWLY): door open
1 FLASH AFTER PRESSING: confirm lock-release
4 FLASH AFTER PROG.: programming successful
10 FLASHES = programming error
STEADY LED: Privacy mode active
OFF AND FLASHING LED (3 every 5 s.): Doctor mode active
SLOW FLASHING: programming
4 FLASHES: device engaged
See page 37 "5. System function"
7