U12 How To Use The Lock-Release; U13 How To Activate The "Follow Me" Function; U14 How To Activate An Additional Relay; Press The Menu Key And Use The - Comelit 1998V Manuel D'utilisation

- use the

keys to view the Link menu, press OK;
System Simplebus
Link Slave in series
Call Simplebus
A/V Audio
Backwards com.
Esc
- select the Master in series using the
confi rm that the switchboard should be active.
The other switchboard
automatically, to become the Slave in series;
- press OK to confi rm the settings;
- press ESC repeatedly to return to the main screen.

U12 How to use the lock-release

The external unit electric lock can be controlled
by pressing key A; if the command is executed a
confi rmation tone sounds.

U13 How to activate the "Follow Me" function

(FollowMe)
This function can be used to divert calls for the
switchboard to local or remote telephones.
CAUTION!
To use this function, telephone switchboard
Art. 2906 and interface Art. 2912 must be fi tted.
Contact your usual installer.
This function can only activated for the
switchboard set as secondary (see "C1 Type of
switchboard", page 60).
To activate this function:

- press the MENU key and use the

the Confi gurations menu, press OK;
• Settings
• Configurations
• Directory
• Received calls
• Alarms
- use the keys to view the Services menu,
press OK;
44
14 :15 : 26

Mon 12 Mar 12

Ok
keys to
will be deactivated

keys to view

14 :15 : 26
Mon 12 Mar 12
• System
• Services
- use the keys to view the FollowMe service.
Activate the service using the
Disable it using ;
FollowMe
Call repeat
Internal units on
Triple call
Codes help
Esc
- press OK to confi rm the settings;
- press ESC repeatedly to return to the main screen.
Once a call has been made, the switchboard will
ring until the remote device begins communicating;
the call can be answered from the switchboard by
cancelling the "Follow me" function.
U14 How to activate an additional relay (e.g.
to activate independently using a specifi c
command: lights, CCTV alarm contacts, vehicle
barriers, entrances without an external unit or
other devices)
Actuators can be activated in standby mode and
during conversation with an external unit.
CAUTION!
To use this function, there must be a main
external unit and actuators Art. 1256. Contact
your usual installer.
To activate the actuator:
- press , you will be asked to enter the code to
activate a specifi c actuator. If there is no code a
generic actuator will be activated;
14 :15 : 26
Mon 12 Mar 12
key.
14 :15 : 26
Mon 12 Mar 12
Ok