Address Confi Guration; Advanced Settings; Network Configuration - Comelit 1454 Manuel D'utilisation

Address confi guration
} Click
to access the "SETTINGS" menu.
} Click
to access address confi guration.
The fi rst time you access the address confi guration, key programming and call confi guration areas, you will be
asked to enter a password: the default password is 0000 (to set a new password, see page 31 for instructions).
} Enter the password and click
} Click
to display the confi gurations without the possibility of modifying them.

Advanced settings

} Assign a ViP address to the software.
VIP address: Each system device must be programmed with a different code, called the ViP
address. The ViP address is an 8-digit code identifying each extension and can be entered
as desired, without following any pre-set sequence. However, we recommend using a logic
diagram to keep track of the addresses entered.
A logic diagram (optional) for entering the ViP address is provided below.
Example: Building/staircase/fl
01041156 • 00021022 • 01001223 • 01030009 • 00000012
} Select either "Master" or "Slave 1/.../15".
Master: by Master we mean the main monitor in an apartment. Every Master monitor in
the system must have a different ViP code. The Master monitor manages all external unit /
switchboard / intercom calls. It is essential that, in an apartment, one of the monitors is set as
a Master.
Slave: by Slave we mean one or more secondary monitors (MAX. 15) in an apartment. Every
Slave has the same ViP address as the Master monitor, but is identifi ed with a unique number
to differentiate it from the other slave monitors.
For Kit 8501, 8501I and 8504, the ViP address is set to 00000001 "Master" by default.
Network confi guration
The software, by default, identifi es a network card on its own terminal, if necessary another
network card can be selected from the drop-down menu.
30
to access set/modify confi gurations.
oor/apartment