Call Confi Gurations; Call Divert - Comelit 1454 Manuel D'utilisation

Call confi gurations
} Click
to access the "SETTINGS" menu.
} Click
to access the confi guration menu.
The fi rst time you access the address confi guration, key programming and call confi guration areas, you will be
asked to enter a password: the default password is 0000 (to set a new password, see page 31 for instructions).
} Enter the password and click
} Click
to display the confi gurations without the possibility of modifying them.
Call times
Awaiting reply: if a call is not answered within this period of time, it is ended (01:00 by default).
Internal Talk: set the maximum duration of a conversation with an internal unit (01:30 by default).
External Talk: set the maximum duration of a conversation with an external unit (01:30 by
default).

Call divert

1. If you want to set timed diversion: set "Wait time" (default setting 00:30). The system will not
allow a value greater than the "Awaiting Reply" time to be set.
2. Set the address of the internal unit or switchboard to which you want to divert the call.
3. To activate the respective functions, check "
R
" Activate diversion if engaged" (3b) (only after carrying out instructions 1 and 2).
4. Go back to the home page and click
The red icon indicates that the function is active, while the green icon indicates that the function is not active.
38
to access set/modify confi gurations.
R
Activate timed diversion" (3a) and/or check
to activate/deactivate call diversion.
3a
1
2
3b
4