Connecting External Calls To Another Mobile Unit; Holding Conference Calls - switel D8525 Mode D'emploi

9.3

Connecting external calls to another mobile unit

If you have accepted an external call on one mobile unit, you can forward the external call to the other mobile unit. To
do this, press the
If there should be no reply from the mobile unit called, you can take the call back with the
After the internal call has been accepted at the other mobile unit, you have the following options:
A. Consultation / Brokering: You can now speak to the internal subscriber and return to the external caller by
pressing the button. You can switch between the external and the internal call as many times as you like in
this way.
B. Forward the call: The external call is forwarded to the mobile unit called by pressing the button
mobile unit.
9.4

Holding conference calls

An external call can be connected to a further internal subscriber as a conference call. In this way, two mobile units
can talk to the external caller simultaneously. Establish the required connection with the external subscriber. To do
this, press the
When the second internal subscriber has accepted the call, hold the
three subscribers will be connected together on a conference call.
During a conference call, you can put the external subscriber on hold with the
again to the conference call with the
The conference call can be terminated by one of the internal subscribers hanging up.
- Multiple mobile units -
button and then the number of the required mobile unit.
button and then the number of the required second mobile unit.
button (press for 2 seconds).
button.
button pressed for 2 seconds and all
button and then switch back
on the first
105