3.6
Connecting to the telephone socket
Connect the telephone cable supplied to the telephone wall socket and to the socket marked with a
"PHONE LINE" symbol on the rear of the base unit.
3.7
Recall button
You will use the Recall button when using your network operator's services such as call waiting etc. The
time of recall is set at 100ms.
3.8
Setting the Time
After the unit is connected to power, the LCD turns on and the display starts the clock at "12:00". If you
want to set the clock to the current time, proceed as follows:
1.
Press the TIME SET button. The clock digits will be flashing.
2.
Now press UP/HOUR button to increment the clock digit.
3.
Press DOWN/MIN button to increment the minute digit.
4.
After the clock displays a correct time, press TIME SET button again to confirm. The clock digits
stop to flash and commerce counting.
3.9
Setting the FM antenna
In order to enjoy the best possible radio reception performance, you must uncoils the FM antenna on the
rear of the unit. This wire is bound with a cable tie. Undo the cable tie and fully extend the FM antenna
to achieve the best reception.
All manuals and user guides at all-guides.com
- Installation -
37