Safety instructions for maintenance and inspections
Regularly maintained and cared for trimmer may be a good
aid. Poor maintenance and care may result in unforeseen
incidents and accidents.
•
Always disconnect the trimmer from power supply
before any work on the trimmer!
•
Do never use aggressive cleaning products. The
trimmer may get damaged or even destroyed.
Maintenance and inspection schedule (fig. 7)
Regularly maintained and cared for trimmer may be a good aid. Poor maintenance and care may result in unforeseen incidents
and accidents.
Time interval
Description
Before operation
•
•
After operation
•
•
Annually/as needed
•
Failure – cause - remedy
Attention: FIRST CHECK FUSES AGAINST OVERHEATING!
Defect
The trimmer does not work
The trimmer works in
intervals
The trimmer vibrates
excessively
Apply universal oil on the blade shaft (fig. 7)
Remove branches and bushes from revolving parts with a brush or blunt tool.
Wipe the body with a soft cloth.
In case of stubborn dirt clean the trimmer with soft cloth with soap water.
Edge or replace the blades
Cause
The trimmer is not plugged correctly
Extension cable damaged
Extension cable damaged
Inner cabling of the trimmer is damaged
Rotating components not balanced
Service
Any technical questions? Complaint? Do you need
spare parts or operation manual?
Go to our website www.guede.com and the section
Service will help you quickly and without bureaucracy.
Please, help us to help you. In order to identify your device
in case of complaint, please indicate serial number, order
number and year of manufacture. All information is available
on the product label. To have all information always at
hand, put them down.
Serial number:
Order number:
Year of manufacture:
Phone:
+49 (0) 79 04 / 700-360
Fax:
+49 (0) 79 04 / 700-51999
E-Mail:
support@ts.guede.com
Remedy
See "Operation"
Check or replace the cable
Check or replace the cable
Contact your service centre
Check the rotating components for damage.
13