Co M M A N D S A N D Co N T R O L; Instructions For Use; Use Of The Machine) - EMAK CR 340 H Manuel D'utilisation Et D'entretien

Before starting the engine, check the oil level
a n d g a s o l i n e re f u e l i n g, fo l l o w i n g t h e
I
instructions given in the engine manual.

5. CO M M A N D S A N D CO N T R O L

GB
INSTRUMENTS (Fig.2)
WARNING: Learn the positions and
functions of all controls and all control
F
devices. Learn the meaning of all symbols
and indicators on the controls, before using
the machine.
D
Keep handles and levers clean, dry and free
from all traces of oil, fuel, general dirt or ice.
E
Clutch lever (1) - Use this lever to engage or
disengage the clutch. The crawlers rotate if the
lever is lowered, when the engine is running. When
NL
the lever is released, the clutch is disengaged and
the parking brake automatically engages.
P
Left crawler unlock lever (2) - Pull the lever to
rotate the machine to the left.
Accelerator lever / choke (3) - This regulates
H
the engine's rpm. The positions are indicated on
a label showing the following symbols:
SK
STARTER position for cold starting,
SLOW position for minimum engine speed,
CZ
FAST position for maximum engine speed.
RUS
UK
WARNING: In the Honda engine, this
lever, also has the power off function 0
PL
(OFF).
Right crawler unlock lever (5) - Pull the lever
to rotate the machine to the right.
FIN
Starter Handle (6) - It must be used to start the
BIH
engine.
SRB
Gearshift lever (8) - It has five positions:
HR
N = Disengagement position
F1 = First forward speed clutch engagement
F2 = Second forward speed clutch engagement
R1 = First reverse speed clutch engagement
R2 = Second reverse speed clutch engagement
24
WARNING: The gear change must be
made at a standstill (clutch lever (1)
released).
Lock lever body (9) - With this release the lever
body to be able to raise the position of tipping.
WARNING: Lock the transport box down,
before moving the machine.
Off lever (only for Emak engine) (10) - Pull the
lever down to stop the engine.
CAUTION: To start the engine, it is
necessary to first lift the lever.

6. INSTRUCTIONS FOR USE

Prohibited uses
WARNING: Use the machine only for
the transport of objects or loads within
the limits of weight and volume indicated,
with the limitations specified in this manual.
Any other use is considered prohibited and
shall void the warranty and manufacturer's
liability, leaving the user liable for costs
deriving from damage or injury to the user
or to others.
The following are also considered prohibited
uses:
- Drive the machine from inside of the
transport box.
- Allows operators to work standing on the
load box support surface and use it as a
support point for ladders or other work
equipment.
- Carrying persons or animals.
- Use the machine to break down walls, poles,
fences, etc..
- Use the machine to crush and/or compact
leaves, trash, containers, bulk material, etc..
The sudden collapse of the crushed material
can unbalance the machine.
- Use counterweights (the manufacturer does
not provide them), or persons, in order to
compensate for excessive or unbalanced
load.
- Transport fuels, without the aid of special and
certified security containers.
- Transpor t corrosive chemical, toxic or