Technical Data - Steinberg Systems SBS-PS-150 Manuel D'utilisation

Balance plateforme
Masquer les pouces Voir aussi pour SBS-PS-150:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
U S E R M A N U A L

TECHNICAL DATA

Parameter description
Parameter value
Product name
FLOOR SCALE
Model
SBS-PS-300
SBS-PS-150
Input: 100-240V AC/
Power supply
50-60Hz 0.5 A
Output: 12V 1A
Battery type
Li-ion 1300 mAh 7.4 V
Protection class
II
Protection rating IP
IP20
Load [kg]
300
Maximum load [kg]
300,9
Minimum load [kg]
2
Resolution [g]
100
Overload
+9d
Ambient temperature
0-40
[°C] during operation
Ambient humidity [%]
25-95
during operation
Zero Range
+ 4% FC
Tare range
0- 4% FC
EN
Maximum safety load
120% FS
Ultimate Load
150% FS
Units
kg/Ib
Automatic
After 120 seconds of inactivity
shut-down [s]
Dimensions [mm]
997x500x70
Weight [kg]
16,5
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe
and trouble-free use of the device. The product is
designed and manufactured in accordance with strict
technical guidelines using state-of-the-art technologies
and
components.
Additionally,
it
is
produced
compliance with the most stringent quality standards.,
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement.
LEGEND
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
ATTENTION! Electric shock warning! (Use this
warning when the unit is powered from the
mains).
Class II protection device with double
insulation.
Only use indoors.
150
Safety transformer, short-circuit proof
150,45
(conditionally or unconditionally).
1
PLEASE NOTE! Drawings in this manual are for
50
illustration purposes only and in some details may
differ from the actual product.
The original operation manual is written in German. Other
language versions are translations from the German.
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in serious injury or even
death.
The terms "device" or "product" are used in the warnings
and instructions to refer to FLOOR SCALE.
2.1. ELECTRICAL SAFETY
CAUTION: The rules of "electrical safety" should be
followed when the device is powered from the mains.
a)
The plug must fit the socket. Do not modify the
plug in any way. Using original plugs and matching
sockets reduces the risk of electric shock.
b)
Avoid touching earthed elements such as pipes,
heaters, boilers and refrigerators. There is an
increased risk of electric shock if the earthed device
is exposed to rain, comes into direct contact with
a wet surface or is operating in a damp environment.
Water getting into the device increases the risk of
damage to the device and of electric shock.
c)
Do not touch the device with wet or damp hands.
d)
Use the cable only for its designated use. Never
in
use it to carry the device or to pull the plug out of
a socket. Keep the cable away from heat sources, oil,
sharp edges or moving parts. Damaged or tangled
cables increase the risk of electric shock.
e)
If using the device in a damp environment cannot
be avoided, a residual current device (RCD) should
be applied. The use of an RCD reduces the risk of
electric shock.
f)
Do not plug the charger into an extension cord.
g)
Do not charge the battery in explosion risk zones.
h)
Do not use in very humid environments or in the
direct vicinity of water tanks.
i)
Prevent the device from getting wet. Risk of electric
shock!
2.2. SAFETY IN THE WORKPLACE
a)
If you discover damage or irregular operation,
immediately switch the device off and report it to
a supervisor without delay.
6
b)
If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
c)
Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
d)
Please keep this manual available for future
reference. If this device is passed on to a third party,
the manual must be passed on with it.
2.3. PERSONAL SAFETY
a)
The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience
and/or knowledge unless they are supervised by
a person responsible for their safety or they have
received instruction on how to operate the device.
b)
The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
2.4. SAFE DEVICE USE
a)
Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and must be repaired.
b)
When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
c)
Keep the device in perfect technical condition.
Before each use check for general damage and
especially check for cracked parts or elements and
for any other conditions which may impact the safe
operation of the device. If damage is discovered,
hand over the device for repair before use.
d)
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
e)
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
f)
Clean the device regularly to prevent stubborn grime
from accumulating.
g)
Keep the device away from sources of fire and heat.
h)
Exceeding the maximum weight load may cause
damage to the device.
i)
The product can be used in places up to 2000 m
above sea level.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there is
still a slight risk of accident or injury when using the
device. Stay alert and use common sense when using
the device.
3. USE GUIDELINES
The device is designed to measure the weight of elements
placed on its pan.
The user is liable for any damage resulting from
unintended use of the device.
30.01.2021
30.01.2021
3.1. DEVICE DESCRIPTION
ZERO
UNITS
TARE
HOLD
HOLD
ZERO: zero the weight
UNITS: select units
TARE: tare the scale
HOLD: hold the result on the display
3.2. PREPARING FOR USE
3.2.1. APPLIANCE LOCATION
The temperature of environment must not be higher than
40°C and the relative humidity should be less than 85%.
Ensure good ventilation in the room in which the device
is being used. There should be at least 10 cm distance
between each side of the device and the wall or other
objects. Keep the product away from hot surfaces. The
device should always be used when positioned on an
even, stable, clean, fireproof and dry surface, and be out
of the reach of children and persons with limited mental
and sensory functions. Position the device such that you
always have access to the power plug. The power cord
connected to the appliance must be properly grounded
and correspond to the technical details on the product
label.
3.3. DEVICE USE
SETTINGS
In order to enter the setting mode, press and hold the
ZERO button. Do not release the ZERO button, the device
will turn on and the "SET" message will appear on the
display. Press the TARE button three times.
Set as follows:
ZERO button - next parameter / parameter exit
UNITS button - enter the parameter
TARE button - select value
Parameter
Description
A-OFF
Automatic shutdown time
120s / 180s / 300s / OFF
bL
Backlight (ON / AUTO / OFF / STB)
Units
Units (kg / Ib / oz)
Por.u
Turn on units (kg / lb / oz / kg.lb.oz)
G.sw
Gravity (On / OFF)
Bmi.sw
Body mass index (ON / OFF)
bAud
Baud Rate (1200 / 2400/4800 / 9600)
PAr
Parity check (none / odd / EwEn)
Mod
Transmission mode
(kEy / Stb / coN / OFF)
Ani,sw
Animal weighing mode (On / OFF)
FiLd.L
Filter level (STr / Week / nor)
LocK.r
Locking range (10/30/50 / OFF)
Pzr
Reset range after power on (3/4/10/20)
Kzr
Key zero range (3/4/5/10)
7
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sbs-ps-300

Table des Matières