Selecting A Call Tone - switel WT270 Mode D'emploi

1. Press the MODE button three times. The
indicator will flash in the display.
2. Channel search is switched on with the
and switched off with the
3. Confirm the selection with the talk button on the left-
hand side.
4. All channels will now be scanned one after the other.
As soon as a channel is found that is currently in use,
channel search will be interrupted for 2 seconds. Press
the TALK button during this time if you want to keep
the channel that has been found and exit the channel
search. Channel search can be switched off at any
time with the MODE button.
3.12

Selecting a call tone

You can transmit a call tone to the other radios using the call
button (see 3.5) when you want to begin a call. 10
different melodies are available.
1. Press the MODE button four times. The CA TONE
indicator will flash in the display.
2. Select the required call tone between 1 and 10 using
the
3. Confirm the selection with the talk button on the left-
hand side.
- Operation -
and buttons.
button.
button
63