Selecting A Call Tone; Additional Receiver Channel; Range Warning; Room Monitoring - switel WT330 Mode D'emploi

4.3

Selecting a call tone

You can transmit a call tone to the other radios using
the call button
different melodies are available.
4.4

Additional receiver channel

An additional CTCSS code can be set here, which
the radio can use to receive further signals. It is
therefore possible to listen to a second code at the
same time if this is used on the same channel. It is
NOT possible to speak on this CTCSS code. You can
then switch between these two CTCSS codes with
the monitor button
4.5

Range warning

If the range warning is switched on, a warning tone
will sound if no signal has been received for two
minutes.
4.6

Room monitoring

With room monitoring, you can listen in to another
room in which you have placed the radio. Switch this
radio to room monitoring. Press the call button on the
other radio for 2 seconds and you will receive signals
from the first radio for 30 seconds.
- Programming options -
when you want to begin a call. 10
.
70