Automatic Energy Saving Mode; Channel Search (Scan Mode) - switel WT270 Mode D'emploi

3.10

Automatic energy saving mode

The radios are designed with a power saving mode. If no
transmissions take place within a certain time, the unit
switches itself off automatically. The time can be set to 1, 2
or 3 hours. In setting 0, energy saving mode is switched off.
1. Press the MODE button seven times. The
indicator will flash in the display.
2. Select the required sensitivity using the
buttons. Energy saving mode is switched off with the
setting 0.
3. Confirm the selection with the talk button on the left-
hand side.
The indicator appears in the display when the energy
saving mode is switched on.
3.11

Channel search (scan mode)

When channel search (scan) is switched on, all 8 channels
are continuously polled until the radio finds a channel that is
being used for speech. Even if other radios are speaking on
one of the 38 call codes, the radio is found channel. If the call
code should not agree with your settings, you must adjust
these by hand.
62
- Operation -
and