Calling Another Subscriber - switel WT270 Mode D'emploi

- Operation -
Radio 1
Radio 2
3
3
05 05
Note: The selected channel and the call code must
correspond for you to be able to talk to one another.

3.5 Calling another subscriber

When you want to talk to other subscribers, proceed as
follows: The two radios must be switched on and set to the
same channel and to the same call code.
Press the small call button once. A ringing tone will
sound on the called unit for two seconds. Now wait until the
person called answers. To speak yourself, press the talk
button. Hold the unit about 5 cm from your mouth and speak
in a normal voice. When you have finished, release the talk
button. The person you are speaking to will hear a brief noise
when you release the call button. This will indicate to the
other party that you have finished speaking and are waiting
for a reply. However, in spite of this, we recommend that you
finish your message with the word "End" so that the person
you are calling knows exactly when he can reply.
58