2
Commissioning
2.1 Check contents of pack
The following items are supplied
two radios with belt clip
one instruction manual
2.2 Fitting the batteries
The batteries required are not supplied with the unit. For
each unit you will require three type AAA 1.5V batteries.
Please use new high-quality alkaline batteries.
1.
To release the belt clip, pull gently on the upper tab
and slide the belt clip upwards (see 2.3).
2.
Then open the compartment by pulling the cover
upwards by the catch.
3.
Now insert the batteries taking care to ensure that the
polarity is correct. Incorrect polarity can damage the
unit.
4.
Close the battery compartment and re-fix the belt clip
(see 2.3).
The current battery capacity is shown in the display.
full
- Commissioning -
half full
two headsets
batteries are
discharged.
53