Automatic Energy Saving Mode - switel WT370 Mode D'emploi

3.9 Increasing the maximum range
The radios are equipped with a so-called Auto-Squelch system, by
means of which weak transmissions and undesirable noises are
automatically filtered out during use. This Auto-Squelch system can be
temporarily switched off in order to increase the range.
Press and hold the AUTO-SQUELCH button on the left-hand side. The
automatic suppression will be switched off and it will now be possible
for even very weak signals to be received. If the AUTO-SQUELCH
button is kept pressed until a signal tone sounds, the Auto-Squelch will
be switched off completely. To switch the Auto-Squelch on again, press
the AUTO-SQUELCH button once more.

3.10 Automatic energy saving mode

The radios are designed with a power saving mode. If no transmissions
take place within a certain time, the unit switches itself off automatically.
The time can be set to 1, 2 or 3 hours. In setting 0, energy saving mode
is switched off.
1. Press the MODE button seven times. The
the display.
2. Select the required sensitivity using the
Energy saving mode is switched off with the setting 0.
3. Confirm the selection with the talk button on the left-hand side.
The indicator appears in the display when the energy saving mode
is switched on.
54
- Operation -
indicator will flash in
and buttons.