Increasing The Maximum Range; Automatic Energy Saving Mode - switel WT227 Mode D'emploi

3.9

Increasing the maximum range

The radios are equipped with a so-called AUTO-SQUELCH system,
by means of which weak transmissions and undesirable noises are
automatically filtered out during use. This AUTO-SQUELCH system
can be temporarily switched off in order to increase the range.
Press and hold the MON button on the left-hand side. The automatic
suppression will be switched off and it will now be possible for even
very weak signals to be received. If the MON button is kept pressed
until a signal tone sounds, the AUTO-SQUELCH will be switched off
completely. To switch the AUTO-SQUELCH on again, press the MON
button once more.

3.10 Automatic energy saving mode

The radios are designed with a power saving mode. If no
transmissions take place within a certain time, the unit switches itself
off automatically. The time can be set to 1, 2 or 3 hours. In setting 0,
energy saving mode is switched off.
1. Press the MODE button seven times. The
in the display.
2. Select the required sensitivity using the
Energy saving mode is switched off with the setting 0.
3. Confirm the selection with the PTT button on the left-hand side.
The indicator appears in the display when the energy saving
mode is switched on.
54
- Operation -
indicator will flash
and buttons.