Technical Specifications - Mecafer MF6500E Manuel Utilisateur

TECHNICAL SPECIFICATIONS

MODEL
Type
Voltage Regulator
Max. AC Output
Rated AC Output
AC Voltage
Frequency
Phase
Power Factor
Degree of Protection
Performance Class
Sound pressure level
(measured at 4 m.)*
Sound power level
Model
Type
Stroke
Displacement (cc)
Max. Output
(HP/kW - RPM)
Fuel
Fuel/Oil mix ratio
Fuel tank Capacity (lt)
Rated Continuous
Operation (hs)
Lubricating oil
Lubricating oil capacity (lt)
Starting System
Ignition system
Spark plug type
Lenght x Width x Height
Net Weight
• Specifications subject to change without prior notice.
• Generating set ISO 8528
* Measured according to EN ISO 3744 Standard.
The figures quoted are emission levels and are not necessarily
safe working levels. Whilst there is a correlation between the
emission between the emission and exposure levels this
cannot be used reliably to determine whether or not further
NPEGG850 NPEGG2400
MF 3800
Brushless, Self-energising, 2-poles, Single phase
3,5 kW
0.85 kW 2.4kW
0.80 kW 2.0kW 3,0 kW
71 db (A) 72.47db (A)
AA dB(A)
93 db (A) 92.47 db (A)
96 dB(A)
152 F UP168
UP 170
Air-cooled 4-stroke overhead valve Petrol Engine
52x38 mm 68x54mm
70 x 54
196
80
208
2.4/1.8
6.5/4.9 -
7 / 3600
- 3600 3600
15
4.2
15
13
6 10
0.4 0.6
0,6
Recoil Starter
Recoil Starter
T.C.I.
E6TC F6TC
F6TC
440x320x 590x440x
710*495*510
360 mm 500 mm
51
30 kg 43 kg
NPEGG3800 NPEGG5200
Brushless, Self-energising, 2-poles, Single phase
Condenser Type
Condenser Type
3.8kW 5.2kW
3.2kW 4.5kW
230V 230 V
50 Hz
50 Hz
Single phase Single phase
cos φ = 1,0
cos φ = 1
IP23 IP 23
G1
G 1
75.55 db (A) 74.8 db (A)
95.55 db (A) 97 db (A)
UP177 UP188
Air-cooled 4-stroke overhead valve Petrol Engine
77x58mm 88x64mm
270 389
13/9.7 - 3600
9/6.7 - 3600
Unleaded Gasoline
Unleaded Gasoline
- - -
10 10
SAE 10W - 30
SAE 10W - 30
1.1 1.1
Recoil / Electric starter
T.C.I.
Electronic starting
680x510x540
mm
67 kg 78 kg
precautions are required.
Factors that influence the actual level of exposure of work-force
include the characteristics of the work room, the other sources
of noise etc. i.e. the number of machines and other adjacent
processes, and the length of time for which an operator is exposed
to the noise. Also the permissible exposure level can vary from
country. This information, however, will enable the user of the
machine to make a better evaluation of the hazard and risk.
39
NPEGG6000 NPEGG7500
MF 6500 E
Brushless,
Self-energising,
2-poles,
Three-phase
3,8 kW
6.0kW 6 / 7.5 kW
5.0kW 3,2 kW 5 / 6.8 kW
230 / 400V
Three phase
75.3 db (A)
BB dB(A)
97 db (A)
96 dB(A)
UP188
UP 177
88x64mm
77 x 58
389
386
13 / 3600
13/9.7 - 3600
25
25
9 9
1.1
1,1
Recoil / Electric starter
F7TC
F7TC
680x540x540
810*570*580
mm
85
80 kg 84 kg
GB
9