Technical Data - Migatronic SIGMA SELECT ROBO 300 Guide De L'utilisateur

Technical data

POWER SOURCE
Mains voltage ±15% (50-60Hz), V
Minimum generator size, kVA
Minimum short-circuit power, MVA
1)
Fuse, A
Mains current, effective, A
Mains current, max., A
Power, 100%, kVA
Power, max., kVA
Power, open circuit, W
Efficiency, %
Power factor
Current range, A
Duty cycle, 100% 20°C (MIG), A
Duty cycle, max. 20°C (MIG), A/%/V
Duty cycle, 100% 40°C (MIG), A/V
Duty cycle, 60% 40°C (MIG), A/V
Duty cycle, max. 40°C (MIG), A/%/V
Open circuit voltage, V
Sphere of application, C / S
2)
Protection class
3)
Standards, C
Standards, S
Dimensions C (HxWxL), mm
Dimensions S (HxWxL), mm
Weight C / S, kg
COOLING UNIT MCU 1300
Cooling efficiency (1 l/min), W
Cooling efficiency (1.5 l/min), W
Tank capacity, liter
Flow, bar - °C - l/min
Pressure max., bar
Standards
Dimension s (HxWxL), mm
Weight
1) This equipment complies with EN / IEC61000-3-12:2014 (/ 2011) provided that the short-circuit power Ssc of the grid at the interface point is greater than or equal to the stated data in the
abovementioned table. It is the responsibility of the installer or user of the equipment to ensure, by consultation with the distribution network operator if necessary, that the equipment is
connected only to a supply with a short-circuit power Ssc greater than or equal to the stated data in the abovementioned table.
2) S This machine meets the demand made for machines which are to operate in areas with increased hazard of electric chocks.
3) The machine is designed for indoor and outdoor use according to protection class IP23 / IP23S.
IP23S: The machine may be stored but is not intended to be used outside during precipitation unless sheltered
300 300 IAC
400 400
16 19
3.7 4.3
16 16
11.0 16.0
15.4 18.3
9.0 11.1
10.7 12.7
30 30
85 85
0,90 0,90
MIG MMA MIG
15-300 15-250 15-300
290/28.5 250/30.0 300/29.0
220/25.0 220/28.8 270/27.5
240/26.0 230/29.2
300/25/29.0 250/40/30.0 300/80/29.0
50-60 65-70
S/CE / S/CE S/CE / S/CE
IP23S IP23
700x260x735 700x260x735
454x260x735 454x260x735
36.9 / 26 53 / 36
1300
1600
5
3.0-60-1.5
5
IEC60974-2.
IEC60974-10 CL.A
207x260x680
20
400
400
27
6.0
20
17.5
26.0
12.1
18.0
30
85
0,90
MMA MIG MMA
15-300 15-400 15-400
300/32.0 345/31.5 345/33.8
400/65/34.0 400/65/36.0
270/30.8 300/29.0 300/32.0
370/32.5 370/34.8
300/80/32.0 400/50/34.0 400/45/36.0
65-70
S/CE / S/CE
IP23
IEC60974-1. IEC60974-5. IEC60974-10 Cl. A
IEC60974-1. IEC60974-10 Cl. A
700x260x735
454x260x735
52 / 35
hereby declare that our machine as stated below
Type: SIGMA SELECT ROBO
conforms to directives: 2014/35/EU
European standards:
Regulation:
Issued in Fjerritslev 10.02.2021
18
400 IAC 550
400 400
29 40
6.0 9.5
20 35
16.5 27.2
28.2 39.2
11.4 18.9
19.5 27.1
30 30
80 90
0,90 0,90
MIG MMA MIG
15-400 15-400 15-550
310/29.5 310/32.5 475/37.8
400/60/34.0 400/60/36.0 550/60/41.5
280/28.0 280/31.2 430/35.5
350/31.5 350/34.0 510/39.5
400/40/34.0 400/40/36.0 550/50/41.5
65-70 75-80
S/CE / S/CE S/CE / S/CE
IP23 IP23
700x260x735 700x260x735
454x260x735 454x260x735
53 / 36 53 / 36
EC DECLARATION OF CONFORMITY
MIGATRONIC A/S
Aggersundvej 33
9690 Fjerritslev
Denmark
2014/30/EU
2011/65/EU
EN IEC60974-1:2018/A1:2019
EN IEC60974-2:2019
EN IEC60974-5:2019
EN / IEC60974-10:2014/A1:2015
2019/1784/EU
Kristian M. Madsen
CEO
MMA
15-550
475/39.0
550/60/42.0
430/37.2
510/40.4
550/50/42.0