Inlet Screen Installation - Agilent Technologies Turbo-V 81-T Mode D'emploi

Inlet Screen Installation

Figure 12
Figure 13
The inlet screens mod. 969-9300 and 969-9309 prevent the blades of
the pump from being damaged by debris greater than 0.7 mm
diameter.
The inlet screen, however, does reduce the pumping speed by about
10 %.
The inlet screen is fitted in the upper part of the pump, as shown in
the figure.
Turbo-V 81-T User Manual / 87-900-984-01 (E)
Technical Information
203/228
17