Agilent Technologies TPS-mini Notice De Mode D'emploi page 272

17 Technical Information
Turbopump Description
Figure 4
Tab. 2
CONTROL NAME
J1 IN-OUT
J2 SERIAL
STATUS
P1 VENT
J5 GAUGE
ON-OFF red switch
with integrated light
(not shown in the
picture)
272/318
DESCRIPTION
Input-output connector to remote control the TPS-mini
Serial input-output connector to control the TPS-mini via an
RS 232 or RS 485 connection
Blue LED to show the system operating condition
Connector to control the optional vent valve
Connector to control external EyeSys Gauge
It is located on the other side of the system (with respect to
the illustrated control panel). It is the power supply switch.
The integrated red light shows the power supply status: it
lights when the power supply is applied to the TPS-mini
TPS-mini User Manual / 87-901-003-01 (E)