Transporting The Unit - Stihl RE 232 Notice D'emploi

with water filter
3
1
2
Remove protective cap (1) from the
N
water inlet
Fit and attach the union nut of the
N
water filter (2) and tighten it by hand
Attach the hose connector (3) and
N
tighten it by hand
Machines without hose reel
Connector on high-pressure connection
1
2
Push seal (1) unto the high-
N
pressure hose
Screw on and tighten the
N
connecting element (2)
RE 232, RE 272 PLUS, RE 282 PLUS
Machines with hose reel
2
Push the knob (1) unto the crank (2)
N
of the hose reel until it engages

Transporting the Unit

Pushing the pressure washer
1
Hold the pressure washer firmly with
N
both hands on the pushbar (1)
Steady the pressure washer with
N
your foot on the kick plate (2), press
pushbar (1) downward and balance
the pressure washer
English
1
2
45