Install And Start; Software Installation - Gima CMS-VESD Notice D'utilisation

ENGLISH
65
Chapter 6
SOFTWARE OPERATING GUIDE
STH_Sync is mainly used with this device produced by our company. And it can
analyze ECG data and SpO data of case, and show and print it. STH_Sync can
2
be used to do daily check of ECG and SpO by common family, and it can also
2
be used to general check for common patient by doctors of hospitals. It can
support reference for doctors, but can not be used for diagnosis.

6.1 Install and Start

6.1.1 System Configuration Required:
CPU: Pentium PIV, above2.0G
Memory: above 128M
Main board: support USB2.0, main board having Intel chips group is
recommended.
Hard disk: 10G or above
Display chip: with more than 16M memory.
Printer: 600dpi laser printer
Display: above 15 inch
CD ROM: CD-ROM with 24 times speed or above (or CD memory System)
Operating System: Microsoft Windows 2000/xp/vista/7
(Windows xp is recommend)
Resolution: above 1024x768
Color: 24 bit color or above
Font: normal font
Printer: 300dpi or above
Interface: USB2.0
The setting can be modified at display attribute in Windows operating system.
If you have any question of modifying the system setting, you can refer to the
help of Windows operating system.

6.1.2 Software Installation

First, put the CD of STH_Sync into the CD-ROM. Then run STH_Sync_EN_
V1.2.exe. (Fig. 6-1)