Operating Guide - Gima CMS-VESD Notice D'utilisation

ENGLISH
71

6.3 Operating Guide

6.3.1 Upload
You can use our product after installing the software and hardware, know how to
operate it. And then you can upload data.
6.3.1.1 Input New Patient Information
Before Press the "Upload" button, you must make sure to set the edition
of the Device. The dialog of "Patient Information" will be shown. (Fig. 6-11)
Fig. 6-11
You can input patient information in this dialog, which will make it convenient to
manage and inquiry the case. You can also input the items you want, or input
nothing, and enter the uploading module directly. Some important information
associated with the printing, which will print in the table header. After you fill out,
click "OK" button, and you can enter the uploading interface.
Note: After the start of the upload, you can not maximize or minimize.
Please set it in advance.
6.3.1.2 Tips and the Corresponding Operation
Fill out the information and click "OK", if the version of the Device is
With Blueth, the system will enter the state of wait for connecting the device,
the system will pop up the dialog box as follows: