Installation - Arjohuntleigh Enterprise 5000X Notice D'utilisation

3. Installation

Connect the mains plug to a suitable socket outlet. Make
sure the mains plug is easily accessible so it can be
disconnected quickly in an emergency.
When the bed is connected to the electricity supply,
indicators will light on the control box (1) and Attendant
Control Panel.
The power supply cord (2) is fitted with a plastic hook (3).
When not in use or before moving the bed, clip the hook
onto the head board, coil up the cable and place it over
the hook as shown.
To isolate the bed from the electricity supply, disconnect
the mains plug from the socket outlet.
3
2
4
1
Cable storage and potential equalisation terminal
A potential equalisation terminal (4) is located at the
head end of the bed.
When other electrical equipment is within reach of the
patient or carer, potential differences between the
equipment can be minimised by connecting together
their potential equalisation terminals.
14