Arjohuntleigh Enterprise 5000X Notice D'utilisation page 8

WARNING
Where risk assessment indicates that a patient is at high risk of
entrapment owing to their medical condition or other
circumstances, and where there is no medical benefit from their
being left in a contoured position, place the mattress platform in
the flat position and disable the controls (Function lockout) when
the patient is unattended.
When the bed is operated, make sure that obstacles such as
bedside furniture do not restrict its movement.
When moving or operating the bed, take care that any attached
accessories (e.g. lifting pole) do not strike doors, ceilings, etc.
Hold the head board or foot board when pushing or pulling the
bed; do not hold the side rails or any attached accessories.
Before operating the bed, make sure the patient is positioned
correctly to avoid entrapment or imbalance.
Take care not to squeeze or trap trailing cables from the
handset/ACP and other equipment between moving parts of the
bed.
Take care not to allow clothing or bed linen to become snagged
on moving parts of the bed.
Do not place the bed on an incline greater than 7 as this may, in
extreme circumstances, cause the bed to overbalance.
This product complies with the requirements of applicable
standards for electromagnetic compatibility (EMC). However,
medical electrical equipment requires special precautions
regarding EMC and should be installed and used in accordance
with the EMC information in the product service manual.
Medical electrical equipment can be affected by portable and
mobile radio frequency communications equipment e.g. cellular
telephones.
6