Transportation and storage
Handle with care. Do not drop. Avoid shock or violent impact.
This equipment should be stored in a clean, dry and well-ventilated area
which meets the following conditions:
Temperature
Relative humidity
Atmospheric pressure
Caution
If the bed is stored for a long time, it should be connected to the
electricity supply for 24 hours every three months to recharge
the backup battery, otherwise it may become unserviceable.
Symbols
-10C to 50C
20% to 90% at 30C, non-condensing
700hPa to 1060hPa
Safe working load
Maximum patient weight
Alternating current (a.c.)
Caution
Refer to instructions for use
Type B applied part. Applied parts are considered
to be: Upper frame section, Bed controls, Side
Rails, Head and Foot Boards
Manufacturer / date of manufacture
56