Arjohuntleigh Enterprise 5000X Notice D'utilisation page 41

Bio-Contour
Backrest angle 
Thigh section 
Mattress Platform Height 
The Bio-Contour up button simultaneously raises the
backrest and thigh sections to provide upright patient
profiling; the raised thigh section prevents the patient
sliding down the bed.
The Bio-Contour down button returns the mattress
platform to a flat position.
These buttons raise and lower the backrest.
The backrest will pause when it reaches an angle
approximately 30 above the horizontal.
These buttons raise and lower the thigh section.
When the thigh section is first raised from the flat position,
the calf section will be in the Fowler position (angled
downwards).
To change the calf section to the vascular (horizontal)
position, refer to the section Adjusting the calf position.
These buttons raise and lower the mattress platform.
When the mattress platform is lowered to 38cm* above
the floor, it will pause then continue to lower until it
reaches its minimum height.
* 40cm on beds with 150mm castors.
.
39