Arjohuntleigh Enterprise 5000X Notice D'utilisation page 30

4
3
Positioning the X-ray cassette
Pull the knob and slide the tray underneath the
backrest.
The red moulding on the top of the X-Ray sitting tool
indicates the top right hand corner of the X-Ray
cassette. Use this feature to assist in accurate
positioning.
X-Ray Sitting Tool
Release the knob to hold the tray in one of the latching
positions.
After use, pull the tray out to the fully open position and
remove the X-ray cassette. Return the tray to the closed
position below the backrest and replace the head
board.
28