Removing The Propeller; Checking The Propeller; Installing The Propeller - Selva Narwhal 115 Manuel D'entretien

Table des Matières

Publicité

LOWR
LOWER UNIT (REGULAR ROTATION MODELS)
6020
6030

REMOVING THE PROPELLER

Remove:
• Propeller
WARNING
Do not hold the propeller with your hands
when removing or installing it. Be sure to
remove the battery leads from the batteries
and the lanyard engine stop switch. Put a
block of wood between the cavitation plate
and propeller to keep the propeller from
turning.

CHECKING THE PROPELLER

Check:
• Blades
• Splines
Cracks/damage/wear → Replace.

INSTALLING THE PROPELLER

Install:
• Propeller
WARNING
Do not hold the propeller with your hands
when removing or installing it. Be sure to
remove the battery leads from the batteries
and the lanyard engine stop switch. Put a
block of wood between the cavitation plate
and propeller to keep the propeller from
turning.
NOTE:
If the groove in the propeller nut is not
aligned with the cotter pin hole, tighten the
nut further until they are aligned.
6-3
E
6
6
6

Publicité

Table des Matières
loading

Table des Matières