Switching The Units On - Dentsply Sirona CEREC AF Notice D'utilisation

Dentsply Sirona
Operating Instructions CEREC AF / AF Connect / AI / AI Connect / AI for Rear
66 37 487 D3652
D3652.201.01.19.02 10.2018
6.5.3

Switching the units on

Prior to initial startup
Prior to initial startup, the wireless keyboard stick must be connected to
a USB port on the rear of the PC. As long as Windows has not yet been
activated, the USB port to the front of the PC is not detected as such.
You can reconnect the stick following activation on the front of the PC.
First startup
1. Switch on the PC for the first time. When activating the Windows
settings, you will be prompted to make a language selection. This is
a one-off procedure. This selection cannot be reset or changed at a
later date.
2. Set the monitor to its maximum resolution or the resolution
recommended by Windows.
3. Install the CEREC SW software on the CEREC AF /AI PC.
For CEREC AF Connect / AI Connect, download the Sirona
Connect SW software from the Sirona homepage. Confirm the
firmware update for the CEREC Omnicam with "YES" .
4. Install the Splashtop Streamer. For this purpose, refer to the Sirona
Remote DVD and Operating Instructions (Sirona Remote DVD
booklet). The Sirona Remote Client is pre-installed on the tablet.
5. If a tablet should have been part of the scope of supply, the Sirona
Remote Client is pre-installed. The establishing of the connection
between PC and tablet is described in Sirona Remote DVD booklet.
For the language setting on the tablet, refer to "Tablet operating
notes [→ 45]".
If the tablet is not part of the scope of supply and you want to install the
Remote Client onto your iPad, go to the Apple Store and search for
Sirona Remote. Sirona Remote is available for download free of charge
from the Apple App Store. Download the Sirona Remote Client and
install it on your iPad. A Sirona Remote Symbol is then displayed on
your iPad.
To connect the iPad to the Streamer, please follow the instructions in
the Sirona Remote booklet.
Proceed in the same way if you want to use a tablet that runs on
Android. To do this, go to the app in the Google Play Store. Sirona
Remote is available for download free of charge from the Google Play
Store. Download the Sirona Remote Client and install it on your Android
tablet. A Sirona Remote Symbol is then displayed on your Android
tablet. Connect the tablet to the streamer by following the instructions in
the Sirona Remote booklet.
Following initial installation
Follow the following steps for proper operation after initial installation.
1. Switch the PC on with the ON/OFF button.
6 Installation and startup
43