Setting Drill Direction On The Motor - Dentsply Sirona Midwest Rhino XE Notice D'utilisation

®
Operating instructions Midwest Rhino XE
67 16 786 D3758.201.01.01.02
5.3

Setting drill direction on the motor

The motor has two drill directions:
● Clockwise (forward), marked F
● Counterclockwise (reverse), marked R
Set forward
➢ Turn the switching ring clockwise to the stop.
Set reverse
➢ Turn the switching ring counterclockwise to the stop.
IMPORTANT! If the marking is in the middle between R and F, the
motor is switched off.
5 Operation
21