Dell Venue 10 Pro 5056 - Dentsply Sirona CEREC AF Notice D'utilisation

6 Installation and startup
50
Operating Instructions CEREC AF / AF Connect / AI / AI Connect / AI for Rear
6.5.5.3

Dell Venue 10 Pro 5056

Basic operation of the tablet is explained below. Further notes and tips
can be found in the documents accompanying the tablet, and on the
manufacturer's web page.
Keys
The tablet has four keys on the side of the device that are marked
according to their function. The on/off switch, the Windows start key and
another key to turn the volume up or down.
Windows 10
The Windows 10 operating system can be operated in two different
modes: the normal desktop view and a mode specially tailored to
operating tablets. As Sirona Remote is a desktop application, the tablet
is delivered in this mode.
Notes on operating the tablet:
● You can access the most important device settings by swiping
inward from the right edge of the screen. Here you can control the
screen brightness, for example, or turn WIFI on or off.
● By clicking on the gear symbol in this menu, you can access all
settings of the device and operating system.
● If you swipe inward from the left edge of the screen, you can switch
between all open applications quickly.
● To turn off the device or switch to standby, press the start button or
click on the start symbol in the bottom left and then on the switch on/
off symbol.
Language setting
The tablet is supplied with English language set as standard. The tablet
system language and the layout of the on-screen keyboard can be
changed. On delivery, the pre-installed languages are English (US),
English (GB), German, French, Italian and Spanish.
1. To change the language, swipe from right to left on the screen.
2. Press the gear symbol.
3. Select the Time & language group and then Region &
language.
4. Now you can switch to another language, by selecting this and
tapping "Set as default".
5. In order to activate the new language, you have to log out of
Windows and then log in again. To do so, open the start menu, tap
on the user shown in the top left, "CADCAM", and in the drop down
menu, select "Sign out".
6. Via "Add a language", even more languages that are not pre-
installed can be added to the system. Please be advised that an
Internet connection is required for this and that the process in this
instance takes some time to complete. The connection with a WIFI
network is described in the following section.
Establishing a connection with a WIFI network
A WIFI connection can be established as normal, via the symbol in the
Task bar.
Dentsply Sirona
66 37 487 D3652
D3652.201.01.19.02 10.2018