Stability Of The Unit; Maintenance And Repair; Modifications To The Product; Accessories - Dentsply Sirona CEREC AF Notice D'utilisation

Dentsply Sirona
Operating Instructions CEREC AF / AF Connect / AI / AI Connect / AI for Rear
66 37 487 D3652
D3652.201.01.19.02 10.2018
4.1.5

Stability of the unit

NOTE
The CEREC AF/CEREC AF Connect unit could slip and fall off the
table
Please ensure that you place the cradle and camera on a flat surface.
The round plate upon which the cradle is mounted is equipped with
non-slip feet to prevent movement.
4.1.6

Maintenance and repair

As manufacturers of dental instruments and laboratory equipment, we
can assume responsibility for the safety properties of the unit only if the
following points are observed:
● The maintenance and repair of this unit may be performed only by
Dentsply Sirona or by agencies authorized by Dentsply Sirona.
● Components which have failed and influence the safety of the unit
must be replaced with original (OEM) spare parts.
Please request a certificate whenever you have such work performed. It
should include:
● The type and scope of work.
● Any changes made in the rated parameters or working range.
● Date, name of company and signature.
4.1.7

Modifications to the product

Modifications to this product which may affect the safety of the operator,
patients or third parties are prohibited by law!
4.1.8

Accessories

In order to ensure product safety, this device may be operated only with
original Dentsply Sirona accessories or third-party accessories
expressly approved by Dentsply Sirona. The user is responsible for any
damage resulting from the use of non-approved accessories.
4 Safety
13