Kreg Adaptive cutting system Guide D'utilisation page 16

(9) Disengage the kickstand lock
(10) Pivot the kickstand under the table.
(11) Adjust foot levelers to desired height by
hand, and lock the leveler locknut in
place using a ¾" combination wrench.
(1) Deploy the kickstand engaging the lock.
(2) Release the leg assembly 1 brace locks.
(3) Lift the wheel end of the table by
the kickstand.
(4) Swing legs under the table.
(5) Rest the end of the table on the wheels.
TABLE SETUP
9
10
TABLE STOW
1
11
3
2
4
5