Kreg Adaptive cutting system Guide D'utilisation page 14

Folding Base-Continued
(12) Slide the retainers into the notches in the brace anchor plates so the slots in the retainers
engage the anchor plates.
(13) Lower the anchor plates with attached retainers onto the protruding studs.
(14) Push down on the folded braces so they contact the table top.
(15) Thread small flange lock nuts onto the brace anchor-plate studs and tighten the nuts using
the included wrenches or a 10mm deep socket and ratchet wrench.
(16) Clip the retainers to the lower leg-assembly bar.
(17) Adhere the setup/stow instructions label
to the table top.
(18) Lift the table off the work surface and
stand the folded table upright on the
wheels and kickstand.
WARNING:
Two people are required to lift the Project Table.
15
15
14
13
ASSEMBLY
14
15
13
16
12
12
13
15
16
17
18