attention
Warns against a possible risk.
• Failure to observe this warning can result in substantial
or minor injuries.
note
Warns against material damage.
• Failure to observe this warning may result in damage
to the fitting or system.
Indicates additional information, advice or
important recommendations.
Refers to information contained in this manual or in
other documents.
→
Indicates a procedure to be carried out.
English
4
3.
bASic SAfeTy infoRmATion
This safety information does not take into account:
• any contingencies or occurences that may arise during
installation, use and maintenance of the devices.
• the local safety regulations for which the operating company
is responsible including the staff in charge of installation
and maintenance.
danger due to high pressure in the installation.
danger due to high temperatures of the fluid.
danger due to the nature of the fluid.
Various dangerous situations
• Prevent any unintentional power supply switch-on.
• Ensure that installation and maintenance work are
carried out by qualified, authorised personnel in
possession of the appropriate tools.
• Guarantee a set or controlled restarting of the pro-
cess, after a power supply interruption.
English
6
2.
inTended uSe
use of fittings s030 that does not comply with the
instructions could present risks to people, nearby
installations and the environment.
• The S030 fitting is intended to measure the flow rate
of clean fluids in the piping thanks to its paddle wheel.
The S030 fitting may be combined to an electro-
nic module for displaying, monitoring or controlling
the flow rate, or a transmitter fitted with a bajonett
connection.
• Use this fitting in compliance with the specifications
and conditions of commissioning and use given in the
contractual documents, in this user manual and in the
user manual for the device which is inserted into it.
• Safe and trouble-free operation of the fitting depends
on its proper transport, storage and installation, as well
as careful operation and maintenance.
• Only use this fitting as intended.
Restraints
Observe any existing restraints when the fitting is exported.
Various dangerous situations
• Observe the general technical rules when installing
and using the fitting.
• Use the fitting only if in perfect working order and
in compliance with the instructions provided in the
instruction manual.
• Do not use the fittings in PVC or PP in explosive
atmospheres.
• Do not use this fitting to measure gas flow rates.
• Do not use fluid that is incompatible with the materials
from which the fitting is made.
• Do not use this fitting in an environment incompatible
with the materials from which it is made.
• Do not subject the fitting to mechanical loads (by placing
objects on top of it or by using it as a step, for example).
• Do not make any external modifications to the device. Do
not paint any part of the fitting.
English
5
5
English
7
7