Intendeduse
2.
inTenDeD use
use of the probe that does not comply with the instructions
could present risks to people, nearby installations and the
environment.
• The conductivity probe type 8221 is used to measure the elec-
trolytic conductivity of a solution.
• This probe must be used in compliance with the characteristics
and commissioning and use conditions specified in the contrac-
tual documents and in the operating instructions.
• Requirements for the safe and proper operation of the probe
are proper transport, storage and installation, as well as careful
operation and maintenance.
• Only use the probe as intended.
→
Observe any existing restraints when the probe is exported.
Type 8221
3.
bAsic sAfeTy informATion
This safety information does not take into account:
• any contingencies or occurrences that may arise during assembly,
use and maintenance of the probe.
• the local safety regulations that the operator must ensure the staff
in charge of installation and maintenance observe.
danger due to high pressure in the installation.
• Stop the circulation of fluid, cut off the pressure and drain the
pipe before loosening the process connections.
danger due to electrical voltage.
• Shut down the electrical power source of all the conductors and
isolate it before carrying out work on the system.
• Observe all applicable accident protection and safety regulati-
ons for electrical equipment.
danger due to high fluid temperatures.
• Use safety gloves to handle the probe.
• Stop the circulation of fluid and drain the pipe before loosening
the process connections.
danger due to the nature of the fluid.
• Respect the regulations on accident prevention and safety rela-
ting to the use of aggressive fluids.
English
3