spare parts
With PVDF paddle-wheel, EPDM
seal, screws and certificate, for
DN15 (except DN15 v2 and
DN20 v2) to DN65
Two versions of the S030 in DN15 and DN20
exist, having different K factors.
Only version 2, identified by the "v2" marking, is
available from March 2012. The "v2" marking can
be found:
• on the bottom of the DN15 or DN20 fitting in
plastic:
• on the side of the DN15 or DN20 fitting in metal:
English
48
Metal fitting
Fig. 6:
Position of O-rings in an S030 fitting
10. pAcKAGinG, TRAnSpoRT
attention
damage due to transport
• Transport may damage an insufficiently protected part.
• Transport the fitting in shock-resistant packaging and
away from humidity and dirt.
• Do not expose the fitting to temperatures that may
exceed the admissible storage temperature range.
English
50
order code
432 301
V2
V2
Plastic fitting
spare parts
set of o-rings (dn6 to dn65) for metal fittings
FKM
EPDM
set of o-rings in fkm for plastic fittings
DN08
DN15
DN20
DN25
DN32
DN40
DN50
set of o-rings in epdm for plastic fittings
DN08
DN15
DN20
DN25
DN32
DN40
DN50
11. SToRAGe
attention
poor storage can damage the fitting.
• Store the fitting in a dry place away from dust.
• Storage temperature of the S030 fitting:
Paddle-wheel
Body fitting material Storage
material
PP
• Stainless steel
• Brass
• PVDF
• PP
• PVC
PVDF
• Stainless steel
• Brass
• PVDF
• PP
• PVC
order code
426 340
426 341
448 679
431 555
431 556
431 557
431 558
431 559
431 560
448 680
431 561
431 562
431 563
431 564
431 565
431 566
English
49
49
temperature
-15 °C...+80 °C
-15 °C...+60 °C
-15 °C...+100 °C
-15 °C...+80 °C
-15 °C...+60 °C
English
51
51