electrical installation
Danger!
Risk of electric shock when reaching into the
equipment!
•
Before starting work, always switch off the power supply
and safeguard to prevent re-activation!
•
Observe applicable accident prevention and safety
regulations for electrical equipment!
Note the voltage and current type as specified on
the rating plate.
Voltage tolerance±10%
Connection to device socket:
Danger!
Risk of electric shock if protective conductor not
connected!
•
Always connect protective conductor!
Earthing connection (if fitted): Middle plug tab
Ensure that the flat seal is seated correctly for the
electrical connection to the device socket.
english
20
mainTenance /
malFuncTiOns
The valve is maintenance-free under normal operating condi-
tions.
malfunctions
If malfunctions occur, check
→
the line connections
→
the operating pressure
→
the power supply and valve control.
If the valve still does not switch, please contact your Bürkert
Service.
replacemenT parTs
Caution!
Using the wrong accessories or replacement parts
may be dangerous!
Incorrect accessories and spare parts may cause injuries
and damage the device and the surrounding area.
•
Use only original accessories and original spare parts
supplied by Bürkert GmbH & Co. KG.
Accessories and replacement parts available on request.
english
22
max. tightening torque: 0.4 Nm
Device socket
Type 1054
Flat seal
Valve
Caution!
If the tightening torque is too great, the device may
be damaged!
•
Observe the max. tightening torque of the screw.
→
Screw device socket to valve to a max. tightening
torque of 0.4 Nm.
Alternative electrical connection:
Two individual wires
packaging, TranspOrT,
sTOrage
Caution!
Transport damage/Storage damage
•
Transport and store the device, protected from wet and
dirty conditions, in shock-resistant packaging.
•
Avoid the effects of heat and cold which could result
in temperatures above or below the permitted storage
temperature.
•
Storage temperature: -20 ... +65°C.
dispOsal
Caution!
Damage to the environment caused by device com-
ponents contaminated with media.
•
Observe the relevant disposal and environmental protec-
tion regulations.
→
Dispose of the device and packaging in an environmentally
friendly manner.
→
Observe national waste disposal regulations.
Type 0127
english
21
english
23