Packaging, Transport, Storage - Burkert S039 Manuel D'utilisation

spare parts
sensor holder in pVdf
With PVDF paddle-wheel, FKM
seal, screws and certificate, for
DN06, DN08, and DN15 v2
With PVDF paddle-wheel, FKM
seal, screws and certificate, for
DN15 (except DN15 v2) to DN50.
set of o-rings (dn6 to dn50) for metal fittings
FKM
EPDM
Fig. 6: Position of O-ring in an S039 fitting
English
28
English
30
order code
559 602
444 657
444 655
444 656
10. pAcKAGinG, TrAnSporT,
STorAGe
attention
damage due to transport
Transport may damage an insufficiently protected part.
• Transport the fitting in shock-resistant packaging and
away from humidity and dirt.
• Do not expose the fitting to temperatures that may
exceed the admissible storage temperature range.
poor storage can damage the fitting.
• Store the fitting in a dry place away from dust.
• Storage temperature: -15 to +100 °C.
damage to the environment caused by products
contaminated by fluids.
• Dispose of the fitting and its packaging in an environ-
mentally-friendly way.
• Keep to the existing provisions on the subject of waste
disposal and environmental protection.
English
29 29
English
31 31