Troubleshooting - Melitta Caffeo SOLO Manuel

11

Troubleshooting

Problem
Coffee only flows
drop by drop.
Coffee does not
flow.
Grinder does not
grind the coffee
beans.
Loud grinder noise
The bean symbols
flash even
though the bean
container is full.
The symbol is
illuminated on the
display.
70 70
Cause
Grinding fineness is too
fine.
Water tank not filled or
incorrectly inserted.
Brewing unit obstructed.
Beans do not drop into
the grinder (beans are
too oily).
Foreign objects in the
grinder
Foreign objects in the
grinder
Insufficient quantity of
ground beans in the
brewing chamber
There is air in the lines
inside the appliance.
Solution
Set the grinding fineness
coarser.
Clean the brewing unit.
Run the integrated descaling
programme, if necessary.
Run the integrated cleaning
programme, if necessary.
Fill the water tank and make
sure it is inserted correctly.
Clean the brewing unit.
Tap lightly on the bean
container.
Call the hotline.
Call the hotline.
Press the button for one-cup
dispensing or the button
for two-cup dispensing
If necessary, fill the water tank
and press the button for coffee
strength . The pump in the
appliance will be activated.
The appliance will be ready
for operation again after it has
been successfully vented.
.