Energy-Saving Mode - Melitta Caffeo SOLO Manuel

• Press the ON/OFF button
→ All symbols in the display flash briefly for confirmation. The appliance is
ready for operation, the standby symbol
Note
During the adjusting process, if you do not press a button within 60 seconds
the appliance automatically reverts to standby mode.
8.2

Energy-saving mode

After the last action, the appliance automatically (depending on the settings)
switches to energy-saving mode (the appliance thus consumes much less energy
than in standby mode). You can set different times for the energy-saving mode. The
appliance is factory-set at 5 minutes
Prerequisite: The appliance must be ready for operation (see „Switching on
and off" on page 49).
Please adjust the timer as follows:
• Simultaneously press both the button for one-cup dispensing
the button for two-cup dispensing
→ The standby symbol
• Press the button for one-cup dispensing
for the energy-saving mode.
→ The symbol for the water tank
• Press the brewing strength button several times
possible times for the timer.
to confirm the selected water hardness.
is illuminated.
.
for more than 2 seconds.
is flashing rapidly.
twice to call up the menu
illuminates.
and
to select from four
55 55