Auto-Off Function - Melitta Caffeo SOLO Manuel

Display
flashing
• Press the ON/OFF button
→ All symbols in the display flash briefly for confirmation. The appliance is
ready for operation, the standby symbol
Note
You can wake up the appliance from the energy-saving mode by pressing on
the button for coffee strength
8.3

Auto-OFF function

The device switches off automatically after the last action (depending on the
setting). You can set different times for the Auto-OFF function. The appliance is
factory-set at 1 hour
Prerequisite: The appliance must be ready for operation (see „Switching on
and off" on page 49).
Please adjust the timer as follows:
• Simultaneously press both the button for one-cup dispensing
the button for two-cup dispensing
→ The standby symbol
• Press the button for one-cup dispensing
menu for the Auto-OFF function.
→ The symbol for the drip tray
56 56
Time
5 minutes
(factory setting)
15 minutes
30 minutes
OFF
to confirm the selected time.
. You can then immediately dispense coffee.
.
for more than 2 seconds.
is flashing.
is illuminated.
is illuminated.
three times to call up the
and