Re-Circulating Requirements - Sirius SU900 Notice D'utilisation Et D'entretien

Connect the appropriate length of ducting to
the fan exhaust point and join up with the
ducting to the exterior.
Do not fix the ducting to the range hood
exhaust outlet with screws-use duct
tape. Use duct tape on all joints.

Re-Circulating Requirements.

If the unit is to be used in the recirculating
mode, fit the carbon filters after the installa-
tion is complete (refer to Figure 14).
The carbon filter fits in behind the alumi-
nium grease filter. Ensure that the plastic
tabs on the carbon filter are facing outwards
otherwise it will be difficult to remove it later
for replacement.
A short length of ductwork must be con-
nected from the exhaust outlet on the fan
to wherever the air is to be exhausted.
Allow sufficient space to connect the duct-
work to the top of the exhaust outlet on the
fan housing. Do not fix the ducting to the
range hood exhaust outlet with screws, use
duct tape. Duct tape should be used on all
joints.
11